Foscam MJPEG Cameras – Port Forwarding on Mac This tutorial shows you how to see your camera remotely from any outside network, which requires port forwardin…
Jan
25
Foscam MJPEG Cameras – Port Forwarding on Mac This tutorial shows you how to see your camera remotely from any outside network, which requires port forwardin…
21 comments
No ping yet
RealTripleV says:
January 25, 2015 at 11:35 am (UTC 0)
hey optimum tech was here he told i got have commercial internet and try to
call opt dept to buy a static ip what do you think and how much is going
be ??if you know
Jonathan Yang says:
January 25, 2015 at 12:07 pm (UTC 0)
you take way TOOOOO long to explain set up. I don’t need an explanation on
every word and what it means, just tell me what to do to set it up! What
would take 5 min max takes almost an hour with your three poorly made
videos. FAIL
jure ursic says:
January 25, 2015 at 12:44 pm (UTC 0)
I have a question. why do I get a router login page when I enter my
external IP address from (whatismyip.com) and not the camera log in?
Smedhammer says:
January 25, 2015 at 12:59 pm (UTC 0)
This was an EXCELLENT video. Very nicely done!!!
Jonathan Yang says:
January 25, 2015 at 1:58 pm (UTC 0)
it’s quite literally infuriating.
JR Moritz says:
January 25, 2015 at 1:59 pm (UTC 0)
Your video helped me a lot. Actually got things up and running. Looking
for the video to set up a DNS service since I am on cable. I really bought
the cam to be able to view when away. Thanks!
S. Rogue says:
January 25, 2015 at 2:41 pm (UTC 0)
18 Minutes! OMG, will be googleing for a written doc, damn, why would i
waste so much time to do such a simple thing?!!
Freddy Calderon says:
January 25, 2015 at 3:04 pm (UTC 0)
Awesome, thank you!!
Kurt Anglese says:
January 25, 2015 at 3:34 pm (UTC 0)
FINALLY! Thank you for posting these easy to follow videos. Last year when
I first set up the camera I spent over 20 frustrating hours trying to get
the camera port forwarded correctly to see it remotely and finally gave up.
If I had these videos then, I would have done it in 1 hour! Thank you!
Danielle Brown says:
January 25, 2015 at 4:06 pm (UTC 0)
no one else has been capable of explaining this to me–a tech geek. if you
aren’t a teacher of some kind, you should be; you’re awesome!!!
Treadmill Repairs says:
January 25, 2015 at 4:15 pm (UTC 0)
Wow you like to string it out a bit don’t you! You must like the sound of
your voice! You could reduce this video by 10 minutes!!
Angel Acevedo says:
January 25, 2015 at 4:29 pm (UTC 0)
Thank YOU!!!!
Joey Sudyka says:
January 25, 2015 at 4:59 pm (UTC 0)
Foscam F18910W shows in the ipcamera tool on mac. I still cannot install
via ethernet and it is not recognized on wireless. Am I doing something
wrong. Using Snow Leopard and Airport Extreme…connected via ethernet. I
have tried following your video with some success. Do I first have to
change a port setting?
MrFairway says:
January 25, 2015 at 5:42 pm (UTC 0)
works great. thank you
MyPhoenix8 says:
January 25, 2015 at 6:09 pm (UTC 0)
Very helpful tutorial. Thank you Foscam!
Lark Lindig says:
January 25, 2015 at 6:27 pm (UTC 0)
can you use with micasa verde lite?
boso74 says:
January 25, 2015 at 7:03 pm (UTC 0)
great video, thanks!
spezunk100 says:
January 25, 2015 at 7:05 pm (UTC 0)
thank you very much
Joey Sudyka says:
January 25, 2015 at 8:02 pm (UTC 0)
Excellent. I have ordered the foscam Cameras and hope it will install OK
with your video. Just wondering if the foscam can be installed easier using
the ethernet direct connect from the foscam to my airport extreme.
guntersg says:
January 25, 2015 at 8:16 pm (UTC 0)
Absolutely excellent tutorial. I wish the manufacturers could have done
this a long time ago. Thanks
MrDcr1 says:
January 25, 2015 at 8:48 pm (UTC 0)
Thank thank you,this has solved my problems, super .