www.uksecuritycameras.com How to connect our KIQR4D and KIQR8D CCTV DVRs to a network and allow port forwarding on a Netgear Router for remote monitoring via…
Mar
14
www.uksecuritycameras.com How to connect our KIQR4D and KIQR8D CCTV DVRs to a network and allow port forwarding on a Netgear Router for remote monitoring via…
25 comments
No ping yet
Paul Richardson says:
March 14, 2014 at 5:32 pm (UTC 0)
Oh and the only way it seems I can view my cams is on a computer or mine
that I have the netviewer installed. I bought the bunker hill 4 channel dvr
with four wired cams from harbor freight but setting this up is not easy. I
must be doing something wrong. The item number of the cams from harbor
freight is 68332 I hope you might be of some help with this. Thank you.
Luis Sigaran Jr says:
March 14, 2014 at 6:21 pm (UTC 0)
thanks for your help, i did exactly what you said but my ports keep coming
up as closed. My netgear wndr4300 i just bought it internet works and all.
any idea why it keeps coming up as closed.
STEVE BROWN says:
March 14, 2014 at 6:27 pm (UTC 0)
Hi Colin im almost there great instructions have tried others without
sucess yours is very clear and precise. My problem is i have the ports open
but when i put the IP Address in browser to open the log in page i only get
my router page not the log in page im using the ip address that came up
when i checked if ports were open, can you help????????????
jarrmac397 says:
March 14, 2014 at 7:10 pm (UTC 0)
Excellent. very well presented.. I managed to open 2 ports but was
unsuccessful for the othe 2 ports, although i followed the same procedures.
I am using a netgear WNV2000. Am i doing something wrong. Also my DVR is
different from what you are using. It’s a DOSS 16 channel dvr. Do you have
any hints for me?
UKSECURITYCAMERAS TelfordCCTV says:
March 14, 2014 at 7:29 pm (UTC 0)
Hi This is Colin, its me in the video. As my colleague says please check
the port numbers are correct, all dvrs use port 80 but many use other ports
for mobile, media and control ports. Also when adding a custom service it
works better to select the DVR from the list of network items shown in the
list at the bottom of the page than typing in the IP address manually. Hope
that helps. Colin
ZennoxGaming says:
March 14, 2014 at 7:42 pm (UTC 0)
My right ear is lonely
ITBPhoneJock says:
March 14, 2014 at 8:21 pm (UTC 0)
Great video… but what do you do if the ports keep coming up closed?
Sandeep Patel says:
March 14, 2014 at 9:01 pm (UTC 0)
well done, i will try on my DVR, one question to colin, which 1 is best
wired cam or wireless ? Regards Sandy
UKSECURITYCAMERAS TelfordCCTV says:
March 14, 2014 at 10:00 pm (UTC 0)
Use the DVR Player App that comes on the CD rom disc with the DVR
UKSECURITYCAMERAS TelfordCCTV says:
March 14, 2014 at 10:00 pm (UTC 0)
Use a DNS service such as No-ip.com , I uploaded a new video yesterday
showing how to do this, hope this helps.
Nezam Uddin says:
March 14, 2014 at 10:52 pm (UTC 0)
use internet explorer 8 to view camera.
UKSECURITYCAMERAS TelfordCCTV says:
March 14, 2014 at 11:19 pm (UTC 0)
Thanks Kevin, we got there in the end didn’t we? Glad you’re sorted now.
Theres a new video about DDNS uploaded yesterday, please have a look if you
don’t have a static ip address.
steven dawes says:
March 14, 2014 at 11:40 pm (UTC 0)
help colin i have followed your post to the letter but i still cant seem to
view my dvr via the ie i opend the ports on my virgin router hub and
checked the the hus has seen it in the tools but when i check the port i
get port closed ???? pulling me hair out now and i aint got much left lol
the ip of the dvr is 192.168.0.13 port 80 please help
UKSECURITYCAMERAS TelfordCCTV says:
March 15, 2014 at 12:10 am (UTC 0)
Your DVR may have different ports, you will find them in the DVR
instruction manual or on the network setup page on your DVR, Port forward
should be the same with your router but to the ports stated in your manual.
drchris75169 says:
March 15, 2014 at 12:10 am (UTC 0)
By the way your presentation was great and more complete than any other
information I have come across.
Vinnie Samms says:
March 15, 2014 at 12:16 am (UTC 0)
Thank you
emaalouf123 says:
March 15, 2014 at 12:21 am (UTC 0)
Excellent tutorial. Thank you.
Zulham Syahputra says:
March 15, 2014 at 1:06 am (UTC 0)
dude, how i can access it from my mac, i was use safari on mac but cannot
brows…on windows it’s ok. my mac run on version os 6.1….help me
please…….
kim payne says:
March 15, 2014 at 1:19 am (UTC 0)
thanks worked a charm didnt get port 80 to be open but it still all worked
only issues i have is the ip for the dvr changes wihich then dosent work on
my phone should i changed the ports from my dvr ip to my ip addres will
that fix it
ColbyoThaFlair (AK iLLMATiK) says:
March 15, 2014 at 2:03 am (UTC 0)
Can you possibly change the NAT from moderate to open on a wired Xbox
connected to a Pc?
Kathy Martin says:
March 15, 2014 at 2:25 am (UTC 0)
Great tutorial on getting my Zmodo DVR to work with my Netgear router!
Thanks for posting. I have one question though – I’ve opened the ports as
suggested however I am not able to get to the DVR via a web browser. It is
working on the mobile app though. Could it be that I am trying to open too
many simultaneous connections to the DVR?
Kevin james says:
March 15, 2014 at 2:39 am (UTC 0)
Colin, Many thanks for your help and advice in installing my DVR. Use this
company!!!!!!!! Products great service just as good.
allove70 says:
March 15, 2014 at 3:02 am (UTC 0)
I have a H.264DVR,,and for some reason I’ve went step by step with all your
directions everything goes well..but when I go to check the ports that I
forwarded (to net gear WGR614v10)..it says that my ports are not open..Ive
tried everything..Please help..
UKSECURITYCAMERAS TelfordCCTV says:
March 15, 2014 at 4:01 am (UTC 0)
wired everytime, wireless can be flaky at times.
drchris75169 says:
March 15, 2014 at 4:17 am (UTC 0)
My router page looks identical to yours. My ports are the same except for
the mobile and my 10.0.0.x has a different last number. I went through it 3
times but my port 9000 and mobile ports show to be closed. Any suggestions
would be greatly appreciated.