«

»

Jan
25

IP Camera Network Configuration Tutorial – How To

CCTV Video Tutorials by www.apexcctv.com – This video gives a brief overview of the network configuration for IP-based surveillance camera installations, shows how to avoid common errors that can be made, and provides detailed examples and instructions regarding the process. Please let us know if the video was helpful by leaving comments. Visit http for more video tutorials, howto guides, and quality security products with outstanding service. ApexCCTV 22 Prestige Circle, Suite 100 Allen, TX 75002 1-800-312-1713

24 comments

No ping yet

  1. jsrnf says:

    Finally got mine setup only after watching this video, thanks !!

  2. mmstudios95 says:

    can you come do it 4 me omg why so hard why

  3. mmstudios95 says:

    omg y so hard
    

  4. pegah241 says:

    @00Mandingo00 with public ip , you can access that ip from outside

  5. Mixer12010 says:

    good job A1

  6. Trollslander says:

    Thank you for this video. I managed to configure my own camera after watching it.

  7. Nark123Official says:

    can you make a video on how to view someones cam on there pc with their ip adress?
    184.171.194

  8. ThoughtManifest says:

    I cant get my foscam ipcam to work on my iphone 4. It seems to work on my computer, i can see the video, scroll around, etc. But i cant get it to work with different apps on my iphone. keep getting errors like connection fail, etc.. My ipcam is hooked direct to my at&t broadband modem. Please help!

  9. manouvras says:

    my friend i got the same brand of camera vivotek…i plug the camera in switch..or router…and cant see it in the installation wizard 2….what do u think.. ?

  10. walsallcrew says:

    Hi could I view on my iPhone If my ip address wasn’t static?
    Thanks
    Andy

  11. anilrampersad says:

    Thank you! This worked well for my IP camera!

  12. 00Mandingo00 says:

    OK. it made total sense to me but you lost me when you accessed your camera at work. how did you come to that specific IP? My camera’s IP address on my home network is the standard 192.168.1.x so how would i access that IP from outside?

  13. mmstudios95 says:

    how are you so smart how can i  do this please help i just dont get this

  14. GP1890 says:

    I have an Axis 215 PTZ and would like to watch my camera from my iPhone4 but did not get what you said does Best Buy do this the geek squad.THANKS

  15. BigSmartArmed says:

    Great tutorial if I was tweaking on speed for speed for 48+ hours. It could also be done about 5 times faster then it already is with that auction voice like “whadda-whadda-whadda- AAAAA-TCIP–bidda-bidda-AND-SOLD!”

    I did set up my IPCAMs, but only when after getting completely fed up and sketching out my OWN diagram with all required steps.

  16. rockstarmax says:

    Your a Genius! Thanks
    Max

  17. princeyashu says:

    well i didnt understand one thing… i might be noob in thiz.. can anyone tell me
    like i have the camrea and all but how do i get the site.. like as u said ur internel ip adress in 9:11 as u said..
    how do i make dat!! like 74.7.157.172
    how do make it in my camera a seprate ip!!

  18. puto6900 says:

    dude ,don’t go too freking FASST, you are making me sick, Im not a computer tech freak, slowdown, a little, thanxs

  19. deevya says:

    wat if i forgot my password?

  20. kildas says:

    How you cancel pinging. If i type ping xxxxx and xxxxx dont respond how do i cancel pinging after lets say 2 pings (it usualy 4 but sometimes it take forever to finish)

  21. sheepdogmark says:

    Eric, I am wanting to add four cams for a tourism website. Each cam will be located in a different location with view of the golf course, lake, beach, etc. I’m wanting to upload a picture every minute and the pic will be viewable on a web page.
    I’m wanting a better resolution than 640 x 480 as the pics will be more of a landscape pic, but you want to be able to see things in the picture as well. If the cam can pan and tilt, great. If it had night vision, great.

    Mark

  22. sheepdogmark says:

    Eric, I am wanting to add four cams for a tourism website. Each cam will be located in a different location with view of the golf course, lake, beach, etc. I’m wanting to upload a picture every minute and the pic will be viewable on a web page.
    I’m wanting a better resolution than 640 x 480 as the pics will be more of a landscape pic, but you want to be able to see things in the picture as well. If the cam can pan and tilt, great. If it had night vision, great.

    sheepdogmark@yahoo.com

  23. wibrle says:

    If it wasn’t for this video, I would have had to pay someone to do it for me. Thanks a lot m8! :D

  24. mzh011 says:

    Thanks for the video, it really helps.
    For people who wants to use ipcam to monitor there homes etc., I also found a website webcamapps.appspot.com. They don’t require network setup (sort of), as long as your ipcam is up in your home network.

Leave a Reply to ThoughtManifest Cancel reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>